<th id="96fg9"></th>
  • 網站公告:









    當前位置:首頁 - 新聞中心 - 常見問題 - 爆破試驗臺的的工藝性特點


    發布時間:2018-04-27 14:23:08   發布人:http://www.k30628.cn
    1. the platform is flat and lubricated, the demand margin is cut and neat, the four sides are straight, and there is no obvious concave and convex representation. The face and edge parts are close and flat, and no degumming, bubbling, depression, indentation, scratches, scratches, cracks, avalanche and knife edges are not allowed.
    2. uniform coating, steel or wooden board flat surface, five colors, no splice, no obvious concave and convex, no mottled, no scratches, no scratches and other damage. Open, boring and chamfering no burr, the appearance of the round angle, even common chamfering joint.
    3. each part of the cabinet must be treated with high quality hot-melt adhesive at high temperature and high pressure.
    4. the link between the plate and the plate of the 4. cabinet is selected with a high quality three in one inside. The two ends of the "L" shaped hole in the connecting part are filled with yellow glue to strengthen the grip strength, bend the arc deformation, prevent seepage and shake off.
    5. the connection between the plate and the hardware fittings. Before consolidating all the screws, it is necessary to make a hole smaller than the diameter and length of the screw. After the high pressure is written to the glue, the screw is twisted into the screw so as to enhance the grip strength, such as connecting the screw and the nut to the outside.
    6. all cabinets are connected and strong, without loose appearance; flat appearance without significant deformation; showing some burrs and sharp edges.
    7. parts have no cracking or split appearance, and will not present the wear and deformation representation that affects the use of the function. It can move some (such as adjustable feet, movable baffles, etc.) flexibly, and the hand lift will not present the everlasting deformation or loosening, and the pressure can fit the demand of the experimental platform.
    8. single-phase three wire sockets are compatible with two wire plugs
    9. all water, electricity and gas roads are safe, applicable and hidden.
    10.產物尺度需求:長、寬、高差錯點≤3mm;鄰邊筆直度:臺面對角線、結構對角線1000mm≤3mm; 2000mm≤4mm; 3000mm≤
    10. product scale requirements: length, width, height difference error point is less than 3mm; adjacent edge straightness: table diagonal, structural diagonal 1000mm less than 3mm; 2000mm = 4mm; 3000mm less than
    On the gas booster pump http://www.k30628.cn first introduced here, I believe you will use the relevant knowledge in the actual work, if you have the needs of this area, welcome to buy.



    2018正版梅花四字诗 沙湾县| 湘阴县| 县级市| 隆林| 石渠县| 图木舒克市| 延川县| 兰溪市| 常宁市| 尼木县| 泽库县| 白山市| 西乌珠穆沁旗| 高陵县| 历史| 深水埗区| 涞水县| 乐平市| 从化市| 广元市| 昂仁县| 伊川县| 宝鸡市| 大渡口区| 金坛市| 巨鹿县| 清涧县| 金秀| 罗源县| 九寨沟县| 芦溪县| 大埔区| 海丰县| 合江县| 兴宁市| 天气| 东方市| 石首市| 沧州市| 鸡东县| 伊宁市| http://baidu.z51xuh.top http://bujrst.top http://www.096lawyer.top http://www.012un.cn http://m.sinax2e.pw http://wap.lsjk2m.pw