<th id="96fg9"></th>
  • 網站公告:

    產品中心

    濟南精拓流體設備有限公司

    電話:0531-69951198

    郵箱:jingtuolt@163.com

    傳真:0531-69951198

    地址:濟南市歷城區西周南路9號

    網址:http://www.k30628.cn

    常見問題

    當前位置:首頁 - 新聞中心 - 常見問題 - 氣體用氣體增壓泵能增壓到

    氣體用氣體增壓泵能增壓到20MPa需要怎么做?

    發布時間:2018-04-20 16:25:55   發布人:http://www.k30628.cn
    首先鋼瓶內得氣體最高壓力不會超出14MPa,要把壓力增壓到20MPa那么就要壓縮鋼瓶內得氣體,在這就要牽涉到幾個問題,
    First, the maximum pressure in the cylinder will not exceed the 14MPa. To pressurize the pressure to 20MPa, the gas in the cylinder must be compressed. In this case, there are several problems involved.
    1:氣體純度問題,特別是做試驗時對氣體純度要求很高如5個九得氮氣,著樣就要使用氣驅氣體增壓泵(臺州菲恩特氣體增壓泵),氣驅氣體增壓泵有個好處就是驅動缸和增壓缸分開,不影響氣體純度不影響試驗效果。
    1: the purity of gas, especially when the purity of the gas is very high, such as 5 nine nitrogen, the gas drive gas supercharging pump (Taizhou Phoenix gas booster pump) is used. The benefit of the gas drive gas supercharging pump is that the driving cylinder and the turbocharged cylinder are separated, and the purity of the gas body does not affect the test effect.
    2:安全系數,現在隨著科技得進步對被增壓氣體得種類需求越來越多,出現了很多鐘危險危害氣體,這種氣體不能接觸高溫或者火花,這時也要選擇菲恩特氣體增壓泵,增壓泵用空氣作為動力源不產生電火花,驅動得空氣還可用來給增壓泵降低溫度,可以是用到各個危險場合?,F在氣體純度和安全都能保證了就要選擇型號了,鋼瓶內得氣體可以選擇ZTA40氣體增壓泵來增壓(ZTA40氣體增壓泵是增壓泵和空壓機得氣體成40:1得關系,如果空壓機為0.6MPa那么增壓后得氣體為24MPa)。
    氣體增壓泵
    2: safety factor, now with the progress of science and technology to be more and more demand for the type of pressurized gas, there are many bell dangerous gas, this gas can not contact high temperature or spark, at this time, it is also necessary to choose the turbocharged gas booster pump, the pressurized pump air as the power source does not generate electric spark, driving the air is also available. Used to reduce the temperature of the booster pump can be used in all dangerous situations. Now the gas purity and safety can guarantee the choice of the model, the gas can be selected in the cylinder ZTA40 gas booster pump to supercharge (ZTA40 gas booster pump is a pressurized pump and air compressor gas into 40:1 relationship, if the air compressor is 0.6MPa then the gas is 24MPa).
    注意事項:
    Matters needing attention:
    1.進入氣體增壓泵系統的氣體或液體必須是純凈的經過濾的清潔高純度氣體(氣動增壓泵分為氣體增壓與液體增壓)
    1. the gas or liquid entering the gas booster pump system must be pure, filtered clean high purity gas (pneumatic supercharging pump is divided into gas turbocharging and liquid pressurization)
    2.增壓泵前需經150目及以上過濾器進行過濾,以免造成進口通道阻塞或損壞增壓泵(針對高壓泵這點很重要)
    2. before the booster pump needs to be filtered by 150 or more filters, so as not to cause obstruction or damage to the inlet channel of the booster pump (for high pressure pump is very important).
    3.系統配有冷卻裝置,如果溫度過高,可以采取冷卻水進行快速冷卻
    3. the system is equipped with cooling device. If the temperature is too high, cooling water can be used for rapid cooling.
    4.進入增壓泵系統氣體驅動缸的空氣必須是純凈的經過濾的壓力穩定的氣體,其壓力可以通過普通調壓閥進行調節(驅動氣壓力一般在2-8bar)
    4. the air in the gas driven cylinder of the pressurized pump system must be pure, filtered, pressure stable gas, and its pressure can be adjusted by the ordinary pressure regulating valve (the driving gas pressure is generally at 2-8bar).
    5.進行壓力調節時,首先要緩慢進行,應注意觀察高壓氣體增壓泵系統的壓力表的顯示壓力,不要超壓
    5. when carrying out pressure regulation, first of all, we must proceed slowly. We should pay attention to the pressure of the pressure gauge of the high-pressure gas booster pump system, not overpressure.
    我們專門為您提供氣體增壓泵,想要了解更多的資訊內容,歡迎訪問我們的網站:http://www.k30628.cn 專業的知識為您提供貼心的服務。
    We specialize in providing you with a gas booster pump, want to know more information, welcome to our website: http://www.k30628.cn professional knowledge for you to provide intimate service.

    13188935873

    qq

    2018正版梅花四字诗 四会市| 鹤峰县| 青浦区| 措勤县| 资溪县| 英吉沙县| 新邵县| 娱乐| 滨州市| 宁国市| 永嘉县| 南郑县| 舟曲县| 晋中市| 凌云县| 独山县| 石泉县| 乡宁县| 含山县| 格尔木市| 太保市| 广德县| 邓州市| 鄱阳县| 西城区| 普定县| 乌海市| 罗山县| 广西| 大港区| 顺昌县| 黄石市| 黑龙江省| 定结县| 阜新市| 富平县| 土默特左旗| 县级市| 两当县| 潼南县| 合肥市| http://www.gei79.cn http://m.sina1fv.pw http://www.lsjp6u.pw http://m.lsj46c.club http://m.av5h4r.top http://cp.n1c3fm.top