<th id="96fg9"></th>
  • 網站公告:

    產品中心

    濟南精拓流體設備有限公司

    電話:0531-69951198

    郵箱:jingtuolt@163.com

    傳真:0531-69951198

    地址:濟南市歷城區西周南路9號

    網址:http://www.k30628.cn

    業內資訊

    當前位置:首頁 - 新聞中心 - 業內資訊 - 快速型增壓缸的使用的階段

    快速型增壓缸的使用的階段特點

    發布時間:2018-05-28 15:53:18   發布人:http://www.k30628.cn
    1.快速推進階段:在快進氣缸上腔通入壓縮空氣,此時其下腔口連通空氣,同時增壓缸儲油桶通過補油閥從油箱快速補油到油缸上腔,油缸下腔油液流回油箱。直到快進活塞桿接觸上件,快進推力與阻力達到平衡,快進氣缸停止并保壓。
    1. rapid propulsion stage: the compressed air is inserted into the cavity of the fast inlet cylinder. At this time, the air in the lower cavity is connected. At the same time, the oil tank of the pressurized cylinder is quickly filled from the tank to the tank of the oil tank through the oil filling valve, and the oil fluid in the lower chamber of the cylinder flows back to the tank. Until the fast piston rod contacts the upper part, the forward thrust and resistance are balanced, and the fast forward cylinder stops and keeps pressure.
    2.增壓過程:當快進氣缸快進推力無法推進時,增壓氣缸A口開始向上腔通壓縮空氣,其活塞帶動與固聯在一起的增壓柱塞向增壓油缸伸進,其下腔B口與空氣連通;同時補油閥切斷增壓油缸上腔與油箱,使它們不再連通;同時被油閥切斷增壓油缸上腔與油箱,使它們不再連通。增壓油缸上腔液體處于封閉狀態,隨增壓柱塞的伸進,其容積發生變化,容積內油液壓力成比例升高,使用于液壓活塞從而使增壓缸輸出更大的力,與快進氣缸活塞一起增壓工進,直到達到工作要求。
    氣體增壓泵
    2. supercharging process: when the fast progressive thrust force of the fast inlet cylinder is unable to push forward, the A inlet of the pressurized cylinder begins to compress the air into the upper chamber, and its piston drives the pressurized plunger connected together to the pressurized cylinder, and the lower B port is connected with the air; and the filling valve cuts off the upper chamber and the tank to make them no longer connected; at the same time, the valve is not connected. The oil valve cuts off the upper chamber and the fuel tank of the supercharged cylinder so that they are no longer connected. The fluid in the turbocharged cylinder is in a closed state. With the expansion of the pressurized plunger, the volume of the fluid is changed, the oil pressure in the volume increases proportionately, which is used in the hydraulic piston to make the turbocharged cylinder output greater force and pressurized with the fast forward cylinder piston, until the work is reached.
    3. 快速復位階段:增壓工進結束,在快進氣缸D口和增壓氣缸下腔B口同時通壓縮空氣,兩缸上腔A,C口通空氣,增壓氣缸快速返回;同時被油閥連通增壓油缸與油箱,在快進氣缸活塞的帶動下,增壓油缸上腔排油,下腔補油直到快進氣缸到位,至此,氣液增壓缸的一個工作過程結束,下個過程程重復以上動作。
    3. rapid reset stage: the supercharging work is finished, the air is compressed at the B mouth of the fast inlet cylinder D and the lower chamber of the pressurized cylinder. The upper chamber of the two cylinder is A, the C port passes air, the pressurized cylinder returns quickly; at the same time, the oil valve is connected to the turbocharged cylinder and oil tank, and the oil cylinder is added to the oil cylinder and the lower cavity is filled up under the drive of the fast inlet cylinder piston. The quick intake cylinder is in place, so that a working process of the gas liquid boosting cylinder ends and the next process repeats the above action.

    13188935873

    qq

    2018正版梅花四字诗 格尔木市| 临清市| 罗江县| 陈巴尔虎旗| 云梦县| 嘉义市| 行唐县| 新乡县| 栾城县| 江华| 黔西县| 新沂市| 彭阳县| 德兴市| 闻喜县| 芜湖县| 温宿县| 红安县| 南部县| 邹平县| 安溪县| 余干县| 澳门| 云南省| 万荣县| 永平县| 阳江市| 城口县| 万荣县| 北辰区| 合山市| 德化县| 伊吾县| 蕲春县| 习水县| 麻江县| 孝昌县| 三河市| 沈阳市| 锡林郭勒盟| 二手房| http://v.lsjdsn.pw http://m5.sina0tg.pw http://china.dmsb82.top http://www.ba7me1.cn http://tv.ux9la0.top http://m5.sinahjy.pw